Your Position: Home > Products > IO Cards >

Ableconn PEXNW-103 1-Port 10GBase-T / NBASE-T PCI Express Ethernet Network Card - 5-Speed RJ-45 Low Profile PCIe 2.0 x4

Ableconn PEXNW-103 1-Port 10GBase-T / NBASE-T PCI Express Ethernet Network Card - 5-Speed RJ-45 Low Profile PCIe 2.0 x4

  • Product Specification:

    • Dimensions 3.6 x 2.6 x 0.8 inches / 92 x 65 x 20 mm
    • Weight 2.1 ounces / 60 g
    • Capacity Up to 10 Gbps
    • Chipset Tehuti TN4010 + Aquantia AQR105 transceiver
    • Supported System Drivers available for 32/64 bit Windows 7-10 / Server 2008-2016, Linux 2.6.32 -4.12, MacOS 10.10 – 10.12, VMWare 5.x-6.0
    • Certification CE, FCC, RoHS
  • Buy at Amazon

Product Description

Feature Bullets

  • Supports auto-negotiation for 10G/5G/2.5G/1G/100M 5 speeds. Fully compliant with IEEE 802.3an (10GBASE-T), IEEE 802.3ab (1GBASE-T), IEEE 802.3u (100BASE-T), IEEE 802.3az (EEE – Energy Efficient Ethernet)
  • Built with Tehuti TN4010 + Aquantia AQR105 transceiver for low-power consumption and high-performance
  • Runs up to 10G at 100m with Cat6a cable or 2.5G at 100m with Cat5e cable
  • Supports Checksum Offload (IP, TCP, UDP), Large Send Offload, and Virtual NIC
  • Fully RoHS compliant. High quality product. Made in Taiwan.



Product Description

The Ableconn PEXNW-10G adds a high speed Ethernet port to your server or workstation and access your network at multiple speeds: 10G, 5G, 2.5G, 1G,and 100Mbps. Powered by Tehuti TN4010 controller and Aquantia AQR105 transceiver, the card delivers lower power consumption, higher performance, and cost effective solution.


Specification

  • Connector:
    • 1 x RJ-45 Female
    • PCI Epress x4 Male

 

  • Chipset: Tehuti TN4010 + Aquantia AQR105 transceiver
  • Data transfer rate:
    • Up to 10 Gbps
  • Software:
    • Drivers available for 32/64 bit Windows 7-10 / Server 2008-2016, Linux 2.6.32 -4.12, MacOS 10.10 – 10.12, VMWare 5.x-6.0
  • Requirements:
    • An empty PCIe x4 or x8 or x16 slot in computer
  • Supports 10Gb, 5Gb, 2.5Gb networking
  • Fully compliant with IEEE 802.3an (10GBASE-T), IEEE 802.3ab (1GBASE-T), IEEE 802.3u (100BASE-T), IEEE 802.3az (EEE – Energy Efficient Ethernet)
  • Compliant with PCI Express Specification, revision 2.0
  • PCI Express x4 Lane host interface
  • RJ-45 Port offer high speed 10Gbps transmission over CAT 6a cable
  • Supports NBase-T of 2.5 and 5 Gbps over Cat 5e cable
  • 10Gb LED (orange = 10G, green = 5G/2.5G/1G) and LNK/ACT green LED
  • Supports 10Gb, 5Gb, 2.5Gb, 1Gb, 100Mb Auto-Negotiation
  • Supports IEEE 802.1Q VLAN tagging
  • Jumbo Frame sizes 16K bytes
  • Up to 64KB Large Send
  • IP, TCP, UDP checksum offloading
  • Virtual NIC support
  • Low Profile PCIe form factor card on a regular size bracket with an additional Low Profile bracket included
  • Fully RoHS compliant
  • Made in Taiwan

 

Package Contents

  • Ableconn PEXNW-103 10GBase-T / NBASE-T Ethernet PCIe x4 Card
  • 1x low profile PCIe bracket


Warranty

  • Limited One-Year Warranty and Lifetime Product Support

Customer FAQ

Feel free to ask questions about this product here..
Ableconn Customer Support Team will do their best to quickly answer your questions. 

Title:*

Email:*

Comment:

Please enter the verification code - humans only!*

Back To Top