Your Position: Home > Products > IO Cards >

Ableconn IDE44-SAT SATA Drive to IDE 44-Pin Mini Vertical Adapter - SATA Drive to 44Pin IDE PATA Motherboard Converter

Ableconn IDE44-SAT SATA Drive to IDE 44-Pin Mini Vertical Adapter - SATA Drive to 44Pin IDE PATA Motherboard Converter

  • Product Specifications:

    • Dimensions 2.7 x 0.6 x 0.6 inches / 69 x 14 x 16 mm
    • Weight 0.2 ounces / 6 g
    • Input SATA Data & Power (7+15 pins) (direct attach to SATA drive)
    • Output IDE (44-pin, PATA) Male (to be connected with a standard 44-pin IDE cable)
    • Chipset Marvell 88SA8052
    • Compatibility OS independent; No driver installation required
    • Supported System Windows, Macs, and Linux
    • Certification CE, FCC, RoHS


  • Click button for purchase link:

  • Amazon US

Product Description

Feature Bullets

  • Convert any 2.5" SATA drive into 44-pin IDE interface just like a standard 2.5" IDE drive. Ideal for computers or embedded systems that are not equipped with SATA controllers.
  • Support 5V SATA III, SATA II and SATA I Drive and SSD
  • Complete hardware solution; no driver installation is required. Compatible with any OS such as: Windows, DOS, Mac, Linux, etc. that support IDE/ATAPI storage devices
  • Mini vertical board with size only 2.7" (L) x 0.6" (W) and mount directly to the back of SATA drive.
  • Fully RoHS compliant. Made in Taiwan.


Product Description

The Ableconn IDE44-SAT allows you to install a SATA HDD or SSD to the motherboard with IDE/ATA connector. It's the easiest and cost effective solution to replace existing IDE drives with newer cost-effective SATA drives to your systems that are only equipped with IDE interfaces.

Specification

  • Connector:
    • 1 x IDE (44-pin, PATA) Male (to be connected with a standard 44-pin IDE cable)
    • 1 x SATA Data & Power (7+15 pins) (direct attach to SATA drive)
  • Chipset: Marvell 88SA8052
  • Data transfer rate:
    • Up to 150 MBps
  • Jumper Selection:
    • 1 x jumper for selection of Master/Slave/Cable Select mode
  • Software:
    • OS independent; No driver installation required
    • Support Windows, Macs, and Linux
  • Support 5V SATA III, SATA II and SATA I Drive and SSD
  • SATA II 3Gbps controller Mini vertical Adapter Board
  • 44Pin 2.0mm IDE male connector for 5V DC and ATA signals
  • PCBA and SATA drive powered by Pin 41& 42 of IDE connector 5V input
  • 48 bits LBA can Break Capacity-Limit to Support HDD larger than 137GB
  • Compliant with Serial ATA 2.6
  • Bootable
  • ATA/ATAPI PIO mode data transfer
  • ATA/ATAPI UDMA data transfer rate of 150, 133, 100, 66, 44, 33, 25, 16.7 MB/s
  • Tag Command Queuing (Max 32 entries)
  • ATA/ATAPI-7 Streaming feature set
  • Fully RoHS Compliant
  • Made in Taiwan


Package Contents

  • Ableconn IDE44-SAT IDE 44-Pin to SATA Drive Mini Adapter

Customer FAQ

Feel free to ask questions about this product here..
Ableconn Customer Support Team will do their best to quickly answer your questions. 

Title:*

Email:*

Comment:

Please enter the verification code - humans only!*

Back To Top