Your Position: Home > Products > IO Cards >

Ableconn IU31-MSAT 2.5" USB 3.1 Gen 2 (10 Gbps) to Dual mSATA SSD Adapter with Hardward RAID - USB SSD

Ableconn IU31-MSAT 2.5" USB 3.1 Gen 2 (10 Gbps) to Dual mSATA SSD Adapter with Hardward RAID - USB SSD

  • Product Specification:

    • Dimensions 4 x 2.8 x 0.2 inches / 100 x 70 x 7 mm
    • Weight 1.3 ounces / 36 g
    • Capacity 10 Gbps, USB 3.1 Gen 2
    • Chipset ASMedia ASM1352R
    • Supported System No driver installation is required on Windows, Mac, and Linux.
    • Certification CE, FCC, RoHS
  • Buy at Amazon

Product Description

Feature Bullets

  • Convert 2x Full Size mSATA SSD to an USB3.1 Gen2 (10Gbps) 7mm height 2.5" drive. With USB 3.1 Gen 2 10Gbps bandwidth, it's able to achieve 825 MB/s pwerformance when configures two mSATA SSD at H/W RAID 0 mode.
  • Can be installed as an internal 2.5" drive with 8x mounting holes and 4x mounting screws. The USB 3.0/3.1 Micro-B female upstream connector is for connecting to computer USB host.
  • No driver installation required. Native support in Windows, Mac and Linux.
  • Supports SATA III (6 Gbps)and SATA II (3 Gbps) mSATA SSD. Supports USB3.1, USB3.0 and USB2.0 main board.
  • CE, FCC, and Fully RoHS compliant. High quality product. Made in Taiwan.


Product Description
The Ableconn IU31-MSAT turns two mSATA SSD modules into an USB 3.1 2.5" SSD drive. The drive metal frame and mounting holes enable you to install it like a 2.5" internal hard drive. With USB 3.1 Gen 2 10Gbps bandwidth, it's able to achieve 825 MB/s pwerformance when configures two mSATA SSD at H/W RAID 0 mode.

Specification

  • Connector:
    • 1 x USB 3.1 Micro-B female
    • 1 x 3.5mm DC power plug jeck (optional external 5V/3A input power)
    • 2 x mSATA 6 Gb/s slot (full size)
  • Chipset: ASMedia ASM1352R
  • Data transfer rate:
    • USB 3.1 up to 10 Gbps
  • Jumper Selection:
    • 1 x jumper for RAID Mode setting
  • Convert 2x Full Size mSATA SSD to an USB3.1 7mm height 2.5" drive
  • Supports H/W RAID 0 Mode
  • Supports SATA III (6 Gbps)and SATA II (3 Gbps) mSATA SSD
  • Supports ATA/ATAPI Packet command set and LBA 48 addressing mode
  • Compliant with Serial ATA Specification Revision 2.6
  • Compliant with USB 3.1 Rev. 1.0, USB 2.0, OHCI 1.0a, and EHCI 0.95
  • Supports SuperSpeed+ (10 Gbps), SuperSpeed (5 Gbps), HighSpeed (480 Mbps), FullSpeed (12 Mbps), and LowSpeed (1.5 Mbps) transaction
  • Latch type mSATA connector on board. It doesn't need screws to retain mSATA SSD
  • PCBA and 2x mSATA SSD can be powered by USB bus in most applications. The optional DC jack power input accepts external 5V/3A power when using power hungry mSATA SSD.
  • LED indicators for mSATA accessing activity or device failure
  • Dimensions (LxWxH): 4 x 2.8 x 0.2 in / 100 x 70 x 7 mm
  • CE, FCC, and Fully RoHS compliant.
  • No device driver installation is required.
  • Made in Taiwan


System Requirements

  • One free USB port
  • USB connection cable with USB 3.0/3.1 Micro-B male plug


Package Contents

  • Ableconn IU31-MSAT 2.5" USB 3.1 Gen 2 to Dual mSATA SSD Adapter
  • 4x Mounting screws

Customer FAQ

Feel free to ask questions about this product here..
Ableconn Customer Support Team will do their best to quickly answer your questions. 

Title:*

Email:*

Comment:

Please enter the verification code - humans only!*

Back To Top